5910-00-116-8882 CAPACITOR,FIXED,ELECTROLYTIC Index 5905-00-116-8886 RESISTOR,FIXED,WIRE WOUND,NONIND

National Stock Number:
5905-00-116-8884

Federal Supply Class:
5905

National Item Identification Number:
001168884

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
749-620312205BUNKER RAMO CORP AMPHENOL CONTROLS DIV
749-620319176SERVO INSTRUMENT CORPORATION
843712119204ARMY, UNITED STATES DEPARTMENT OF THE
RC15-01-440204454SENSOR SYSTEMS, L.L.C.


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION325.0 MINIMUM AND 335.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION12.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BODY DIAMETER1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM
BODY LENGTH0.867 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-1.00 TO 1.00 SINGLE SECTION
OVERALL DIAMETER1.689 INCHES MAXIMUM
OVERALL LENGTH1.897 INCHES MAXIMUM
MOUNTING LIP DEPTH0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM
MOUNTING LIP DIAMETER1.4320 INCHES MINIMUM AND 1.4420 INCHES MAXIMUM
MOUNTING METHODCLAMP RING
PILOT DIAMETER1.3120 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM
PILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.125 INCHES NOMINAL
SHAFT STYLEROUND
SHAFT LENGTH1.000 INCHES NOMINAL
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION165.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-2.0 TO 2.0 DEG ANGULAR ROTATION SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY4 TAB, SOLDER LUG
TEST DATA DOCUMENT19204-8437121 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
UNDERCUT DIAMETER1.302 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
UNDERCUT WIDTH0.0680 INCHES MINIMUM AND 0.0780 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us