|
|
|
National Stock Number:
5905-00-116-8915
Federal Supply Class:
5905
National Item Identification Number:
001168915
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| 579-6 | 54294 | SHALLCROSS INC | | 721-0568-060 | 13499 | ROCKWELL COLLINS, INC. | | R2137-060 | 58880 | MEGGITT (NEW HAMPSHIRE), INC | | R578-6 | 54294 | SHALLCROSS INC | | R579-6 | 52494 | WHITE CONSOLIDATED INDUSTRIES INC UNIVERSAL NOLIN DIV | | R579-6 | 54294 | SHALLCROSS INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 10.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 | | BODY DIAMETER | 0.200 INCHES MAXIMUM | | BODY LENGTH | 0.495 INCHES MAXIMUM | | CUBIC MEASURE | 0.006 CUBIC INCHES | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 4.400 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | SPECIFICATION/STANDARD DATA | 13499-721-0568 MANUFACTURERS SOURCE CONTROL | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 | | TERMINAL LENGTH | 1.250 INCHES MINIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 13499-7210568 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|