|
|
|
National Stock Number:
5905-00-117-4693
Federal Supply Class:
5905
National Item Identification Number:
001174693
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 37-815130-1 | 07397 | GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS INC. DBA GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS |
|
Techincal Specification:
| SECTION QUANTITY | 2 | | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS 1ST SECTION | | 100.0 KILOHMS 2ND SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 ALL SECTIONS | | SHAFT BEARING TYPE | SLEEVE | | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 ALL SECTIONS | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 0.875 INCHES NOMINAL | | BODY LENGTH | 1.268 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, FLATTED | | FIRST FLAT LENGTH | 0.190 INCHES NOMINAL | | FLAT HEIGHT | 0.109 INCHES NOMINAL | | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND | | 0.1248 INCHES MAXIMUM | | SHAFT LENGTH | 0.812 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 354.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 354.0 NOMINAL | | NONTURN DEVICE LOCATION | AT 11:00 OCLOCK | | NONTURN DEVICE RADIUS | 0.312 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | TERMINAL TYPE AND QUANTITY | 6 TURRET | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 07397-37-815130 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 2.080 INCHES NOMINAL | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
|
|