| ELECTRICAL RESISTANCE PER SECTION | 20.000 OHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| BODY HEIGHT | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| BODY LENGTH | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| BODY WIDTH | 0.187 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| CONTACT ARM ELECTRICAL OFF POSITION | FULLY CW |
| LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.064 INCHES MINIMUM AND 0.084 INCHES MAXIMUM |
| OVERALL HEIGHT | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| OVERALL LENGTH | 0.645 INCHES MINIMUM AND 0.705 INCHES MAXIMUM |
| OVERALL WIDTH | 0.187 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 1 |
| MOUNTING HOLE DIAMETER | 0.069 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| MOUNTING METHOD | UNTHREADED HOLE |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT LENGTH | 0.080 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| SHAFT STYLE | ROUND, SLOTTED |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| TERMINAL LENGTH | 0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| TERMINAL TYPE AND QUANTITY | 3 PIN |