| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 1ST SECTION AND 50.0 KILOHMS 2ND SECTION AND 15.0 OHMS 3RD SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| BODY LENGTH | 4.501 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 1ST SECTION AND -0.10 TO 0.10 2ND SECTION AND -1.00 TO 1.00 3RD SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| OVERALL DIAMETER | 1.096 INCHES MAXIMUM |
| OVERALL LENGTH | 5.157 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 0.70 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.002 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 1ST SECTION AND -3.0 TO 3.0 2ND SECTION AND -5.0 TO 5.0 3RD SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL |
| SECTION QUANTITY | 3 |
| SHAFT BEARING TYPE | BALL |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 5000.0 1ST SECTION AND 25000.0 2ND SECTION AND 7.5 3RD SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -2.0 TO 2.0 OHMS ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 12 TAB, SOLDER LUG |
| UNDERCUT DIAMETER | 0.750 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |