|
|
|
National Stock Number:
5905-00-126-1560
Federal Supply Class:
5905
National Item Identification Number:
001261560
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 695-2-40015 | 27626 | DIGILOG ELECTRONICS CORP | | 695-2-40015 | 50237 | CAE USA INC. | | 695-2-40015 | 95210 | PEERLESS INSTRUMENT CO., INC. |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY DIAMETER | 2.250 INCHES MAXIMUM | | BODY LENGTH | 2.250 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION TABLE | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ZERO BASED LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -2.00 TO 2.00 SINGLE SECTION | | LATERAL RUNOUT | 0.002 INCHES | | OVERALL DIAMETER | 2.750 INCHES MAXIMUM | | OVERALL LENGTH | 3.125 INCHES NOMINAL | | MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.5 | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER | 1.8750 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.001 INCHES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT END PLAY | 0.005 INCHES | | SHAFT DIAMETER | 0.625 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT RUNOUT | 0.002 INCHES | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.250 INCHES MAXIMUM | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2500.0 SINGLE SECTION | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 50237-695-2-40015 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 1.875 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
|
|