|
|
|
National Stock Number:
5905-00-134-0425
Federal Supply Class:
5905
National Item Identification Number:
001340425
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 134FTS107-3 | 08815 | HONEYWELL INTERNATIONAL INC | | 412197-13 | 10112 | GENERAL DYNAMICS MOTION CONTROL LLC | | 412197-13 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 8.5 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 20.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION | | BODY DIAMETER | 1.767 INCHES MAXIMUM | | BODY LENGTH | 0.977 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FEATURES PROVIDED | NONMETALLIC SHAFT | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | OVERALL DIAMETER | 2.120 INCHES MAXIMUM | | OVERALL LENGTH | 1.439 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 0.40 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.7670 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER | 1.5620 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | BEARING | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.562 INCHES NOMINAL | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 180.0 SINGLE SECTION | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 4250.0 SINGLE SECTION | | TAP LOCATION TOLERANCE PER SECTION | -5.0 TO 5.0 OHMS SINGLE SECTION | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -300.0 TO 300.0 SINGLE SECTION | | TERMINAL LOCATION | UPPER ADJACENT SIDE TWO ROWS | | TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 80020-41297 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 1.750 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
|
|