|
|
|
National Stock Number:
5910-00-031-3610
Federal Supply Class:
5910
National Item Identification Number:
000313610
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 2679031-1B | 53711 | NAVAL SEA SYSTEMS COMMAND | | 2836284-8 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 908-617-1035 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | F410B103S5 | 72928 | GULTON INDUSTRIES INC GUDEMAN DIV | | X4831035-5W2 | 84411 | AMERICAN SHIZUKI CORP |
|
Techincal Specification:
| BODY DIAMETER | 0.177 INCHES NOMINAL | | BODY LENGTH | 0.624 INCHES MINIMUM | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 10000.000 PICOFARADS SINGLE SECTION | | CASE INSULATION MATERIAL | PLASTIC | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.3000 | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | SPECIAL TEST FEATURES | BURN-IN | | TERMINAL LENGTH | 1.625 INCHES MINIMUM | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 95542-908-617 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
|
|