|
|
|
National Stock Number:
5910-00-050-2613
Federal Supply Class:
5910
National Item Identification Number:
000502613
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| B605001797 | 88818 | KEARFOTT CORPORATION | | C605006389 | 88818 | KEARFOTT CORPORATION | | F310A5601G050-389 | 05397 | UNION CARBIDE CORP MATERIALS SYSTEMS DIV | | KA5601FK501G797 | 88930 | UNION CARBIDE CORP NUCLEAR DIV | | KA5601FK50G | 05397 | UNION CARBIDE CORP MATERIALS SYSTEMS DIV | | KA5601FK50G-797 | 05397 | UNION CARBIDE CORP MATERIALS SYSTEMS DIV |
|
Techincal Specification:
| BODY HEIGHT | 0.125 INCHES NOMINAL | | BODY LENGTH | 0.500 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 0.280 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 5600.000 PICOFARADS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.400 INCHES NOMINAL | | DIELECTRIC MATERIAL | PLASTIC | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.1500 | | INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHMS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -200.0 SINGLE SECTION | | TERMINAL DIAMETER | 0.020 INCHES NOMINAL | | TERMINAL LENGTH | 1.500 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 14804-B605001797 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT SINGLE SECTION |
|
|