|
|
|
National Stock Number:
5910-00-088-8724
Federal Supply Class:
5910
National Item Identification Number:
000888724
Description:
CAPACITOR,FIXED,PAPER DIELECTRIC
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 1145019P1 | 94117 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | 87 081 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | EFX104K20 | 01884 | EXXELIA USA, INC. |
|
Techincal Specification:
| BODY HEIGHT | 1.063 INCHES NOMINAL | | BODY LENGTH | 3.563 INCHES NOMINAL | | BODY STYLE | W/THD MTG HOLE(S)/STUD(S) TERMINALS ON ONE SURFACE | | BODY WIDTH | 1.188 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 0.100 MICROFARADS SINGLE SECTION | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.000 | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 20000.0 MEGOHMS | | INSULATION RESISTANCE AT REFERENCE TEMP | 500000.0 MEGOHMS | | MATERIAL | PLASTIC CASE | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED MOUNTING HOLES | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 2000.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL TYPE AND QUANTITY | 1 SOLDER STUD | | TEST DATA DOCUMENT | 12217-1145019+1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION | | UNTHREADED MOUNTING HOLE DIAMETER | 0.196 INCHES NOMINAL |
|
|