|
|
|
National Stock Number:
5910-00-097-7578
Federal Supply Class:
5910
National Item Identification Number:
000977578
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 01E21000 | 50319 | HEKIMIAN LABORATORIES INC CUSTOMER SUPPORT DEPT | | 140012P125 | 94117 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | 26871 | 23386 | THALES DEFENSE & SECURITY INC | | 719B1CA104PJ101SA | 56699 | BC COMPONENTS | | 719B1CA104PK101SA | 71590 | CRL COMPONENTS INC | | 719B1CA104PK101SA | 80031 | MEPCO/ELECTRA INC | | LP7S1B104J | 01884 | EXXELIA USA, INC. | | H2E1-104E | 99515 | ELECTRON PRODUCTS INC |
|
Techincal Specification:
| BODY HEIGHT | 0.180 INCHES NOMINAL | | BODY LENGTH | 0.550 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 0.310 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 0.100 MICROFARADS SINGLE SECTION | | DIELECTRIC MATERIAL | PLASTIC | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 94117-140012+125 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
|
|