|
|
|
National Stock Number:
5910-00-105-7521
Federal Supply Class:
5910
National Item Identification Number:
001057521
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 0160-0124 | 1LQK8 | KEYSIGHT TECHNOLOGIES, INC. | | 0160-0124 | 28480 | HEWLETT-PACKARD COMPANY | | 0160-0124 | 7ZXR5 | KEYSIGHT TECHNOLOGIES INC | | 0160-0124 | 99217 | BELL INDUSTRIES INC ELECTRONIC DISTRIBUTOR DIV | | P93275 PSP | 56289 | SPRAGUE ELECTRIC CO WORLD HQS |
|
Techincal Specification:
| BODY HEIGHT | 1.250 INCHES NOMINAL | | BODY LENGTH | 2.000 INCHES NOMINAL | | BODY STYLE | W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 1.250 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 0.115 MICROFARADS 1ST SECTION AND 0.864 MICROFARADS 2ND SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.688 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.375 INCHES NOMINAL | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | INSULATION RESISTANCE AT REFERENCE TEMP | 6000.0 MEGOHM-MICROFARADS | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED MOUNTING HOLES | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC ALL SECTIONS | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | SERIES CONNECTED | | SECTION QUANTITY | 2 | | TERMINAL LENGTH | 0.750 INCHES NOMINAL | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TOLERANCE RANGE PER SECTION | -1.00 TO 1.00 PERCENT ALL SECTIONS | | UNTHREADED MOUNTING HOLE DIAMETER | 0.188 INCHES NOMINAL |
|
|