5910-00-107-2572, CAPACITOR,FIXED,PLASTIC DIELECTR

5935-00-107-2573 CONNECTOR,PLUG,ELECTRICAL

National Stock Number:
5910-00-107-2572

Federal Supply Class:
5910

National Item Identification Number:
001072572

Description:
CAPACITOR,FIXED,PLASTIC DIELECTR

Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.

Manufacturer Information:

195-134-9009	70210	HONEYWELL INTERNATIONAL INC.
933-1066-090	13499	ROCKWELL COLLINS, INC.
AP01B472J	12517	COMPONENT RESEARCH CO INC
F310A4701J050	05397	UNION CARBIDE CORP MATERIALS SYSTEMS DIV
F310A4701J050	31433	KEMET ELECTRONICS CORPORATION
F310A470K050	31433	KEMET ELECTRONICS CORPORATION
FKA4701FK50K	31433	KEMET ELECTRONICS CORPORATION
KA4701FK50J	05397	UNION CARBIDE CORP MATERIALS SYSTEMS DIV
KA4701FK50J	31433	KEMET ELECTRONICS CORPORATION

Techincal Specification:

CAPACITANCE VALUE PER SECTION	4700.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION	-5.00 TO 5.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	50.0 DC SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	-200.0 SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS	-30.0 TO 30.0 SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 DEG CELSIUS MINIMUM AND
	85.0 DEG CELSIUS MAXIMUM
BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
BODY LENGTH	0.500 INCHES NOMINAL
BODY WIDTH	0.280 INCHES NOMINAL
BODY HEIGHT	0.125 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY	2 UNINSULATED WIRE LEAD
TERMINAL LENGTH	1.250 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.395 INCHES MINIMUM AND
	0.405 INCHES MAXIMUM
CASE MATERIAL	PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP	1000000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	0.1500
RELIABILITY INDICATOR	NOT ESTABLISHED
TERMINAL SURFACE TREATMENT	SOLDER

Click here to Register for Free 30-day Trial