5910-00-112-7276, CAPACITOR,FIXED,PAPER DIELECTRIC

5910-00-112-7277 CAPACITOR,FIXED,PAPER DIELECTRIC

National Stock Number:
5910-00-112-7276

Federal Supply Class:
5910

National Item Identification Number:
001127276

Description:
CAPACITOR,FIXED,PAPER DIELECTRIC

Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.

Manufacturer Information:

7631666	19204	ARMY, UNITED STATES DEPARTMENT OF THE
CP53B4EF504L	81350	JOINT ARMY-NAVY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
JANC25	81350	JOINT ARMY-NAVY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BODY HEIGHT	1.000 INCHES NOMINAL
BODY LENGTH	2.000 INCHES NOMINAL
BODY STYLE	W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE
BODY WIDTH	1.750 INCHES NOMINAL
CAPACITANCE VALUE PER SECTION	0.500 MICROFARADS ALL SECTIONS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.375 INCHES NOMINAL
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	1.0000
FEATURES PROVIDED	HERMETICALLY SEALED CASE
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP	20.0 MEGOHM-MICROFARADS
INSULATION RESISTANCE AT REFERENCE TEMP	2000.0 MEGOHM-MICROFARADS
MOUNTING FACILITY TYPE AND QUANTITY	2 UNTHREADED MOUNTING HOLES
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	600.0 DC ALL SECTIONS
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
RELIABILITY INDICATOR	NOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR	ONE TERMINAL COMMON TO EACH SECTION
SECTION QUANTITY	2
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG
TOLERANCE RANGE PER SECTION	-15.00 TO 15.00 PERCENT 1ST SECTION AND -15.00 TO 15.00 PERCENT 2ND SECTION
UNTHREADED MOUNTING HOLE DIAMETER	0.188 INCHES NOMINAL

Click here to Register for Free 30-day Trial