| ELECTRICAL POLARIZATION | POLARIZED |
| ANODE TYPE | SOLID |
| BODY HEIGHT | 1.625 INCHES NOMINAL |
| BODY LENGTH | 0.875 INCHES NOMINAL |
| BODY STYLE | W/THD MTG HOLE(S)/STUD(S) TERMINAL(S) ON ONE SURFACE |
| BODY WIDTH | 0.875 INCHES NOMINAL |
| CAPACITANCE VALUE PER SECTION | 27.000 MICROFARADS SINGLE SECTION |
| CAPACITIVE ELECTRODE MATERIAL | TANTALUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 0.281 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.281 INCHES NOMINAL |
| DC LEAKAGE AT MAXIMUM OPERATING TEMP | 65.0 MICROAMPERES |
| DC LEAKAGE AT REFERENCE TEMP | 16.200 MICROAMPERES |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS | 11.00 |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 116.0 |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED MOUNTING STUDS |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 300.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL LENGTH | 0.375 INCHES NOMINAL |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 18876-MIS16253 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |