|
|
|
National Stock Number:
5915-00-070-8075
Federal Supply Class:
5915
National Item Identification Number:
000708075
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| 000RF2391-7 | 13619 | EMS DEVELOPMENT CORPORATION | | 11726308-3 | 19200 | US ARMY ARDEC RDECOM | | 5915000708075 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5915000708075 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | F-20399-7 | 96733 | SFE TECHNOLOGIES | | RF02391-7 | 13619 | EMS DEVELOPMENT CORPORATION | | RF2391-7 | 13619 | EMS DEVELOPMENT CORPORATION |
|
Techincal Specification:
| BODY LENGTH | 3.630 INCHES NOMINAL | | BODY MATERIAL | METAL | | BODY OUTSIDE DIAMETER | 1.750 INCHES NOMINAL | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 THREADED STUD INPUT 1ST FUNCTION | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 THREADED STUD OUTPUT 2ND FUNCTION | | INCLOSURE TYPE | ENCASED | | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK | | OVERALL LENGTH | 4.880 INCHES NOMINAL | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNEF | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING | | NOMINAL THREAD SIZE | 0.750 INCHES | | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 40.0 BLANK | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 28.0 VOLTS DC BLANK | | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK | | STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES | | TEST DATA DOCUMENT | 87557-9118C6031-7 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|