| AVERAGE POWER RATING PER FUNCTION | 25.0 WATTS BLANK |
| BODY MATERIAL | METAL |
| BODY LENGTH | 6.440 INCHES NOMINAL |
| BODY WIDTH | 5.000 INCHES NOMINAL |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 65.0 MINIMUM BLANK AND 3.0 MAXIMUM BLANK 1ST FUNCTION |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 6.937 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 4.375 INCHES NOMINAL |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, RECEPTACLE INPUT 1ST FUNCTION |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, RECEPTACLE OUTPUT 2ND FUNCTION |
| FREQUENCY BAND WIDTH PER FUNCTION | 531.50 MEGAHERTZ BLANK AND 552.50 MEGAHERTZ BLANK |
| INCLOSURE TYPE | ENCASED |
| INPUT IMPEDANCE PER FUNCTION W/LOAD | 50.0 OHMS BLANK |
| INPUT TERMINAL IDENTIFICATION | 06845 |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 2.0 BLANK |
| OUTPUT TERMINAL IDENTIFICATION | 06845 |
| OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | 50.0 OHMS BLANK |
| OVERALL HEIGHT | 2.500 INCHES NOMINAL |
| OVERALL LENGTH | 7.440 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| PRECIOUS MATERIAL AND LOCATION | FLASH GOLD AND SILVER PLATED CASE SILVER |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| REFERENCE FREQUENCY PER FUNCTION | 542.0 MEGAHERTZ BLANK |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 504.00 MEGAHERTZ BLANK AND 531.50 MEGAHERTZ BLANK AND 552.50 MEGAHERTZ BLANK AND 580.00 MEGAHERTZ BLANK |
| VOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION | 531.50 MEGAHERTZ BLANK AND 552.50 MEGAHERTZ BLANK |
| VOLTAGE STANDING WAVE RATIO PER FUNCTION | 1.2 BLANK |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| TEST DATA DOCUMENT | 06845-2019188-0701 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.166 INCHES NOMINAL |