| BODY HEIGHT | 0.950 INCHES MAXIMUM |
| BODY LENGTH | 2.250 INCHES MINIMUM |
| BODY MATERIAL | METAL |
| BODY WIDTH | 0.688 INCHES MINIMUM |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 1.0 MAXIMUM BLANK AND 30.0 MINIMUM BLANK 1ST FUNCTION |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.650 INCHES NOMINAL |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 PIN INPUT 1ST FUNCTION |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 PIN OUTPUT 2ND FUNCTION |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 PIN GROUND 3RD FUNCTION |
| FREQUENCY BAND WIDTH PER FUNCTION | 1.00 KILOHERTZ BLANK AND 390.00 KILOHERTZ BLANK |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| INPUT IMPEDANCE PER FUNCTION W/LOAD | 1.0 KILOHMS BLANK |
| INPUT TERMINAL IDENTIFICATION | A60244 |
| INPUT TERMINAL MANUFACTURER CODE | 83241 |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 1.0 BLANK |
| LOAD IMPEDANCE PER FUNCTION | 1.0 KILOHMS BLANK |
| OUTPUT TERMINAL IDENTIFICATION | A60244 |
| OUTPUT TERMINAL MANUFACTURER CODE | 83241 |
| OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | 1.0 KILOHMS BLANK |
| OVERALL HEIGHT | 1.200 INCHES MINIMUM |
| MAXIMUM DIELECTRIC WITHSTANDING DC VOLTAGE | 50.0 VOLTS AT SEA LEVEL |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.112 INCHES |
| OPERATING TEMP RANGE | -55.0 TO 100.0 CELSIUS |
| PRINCIPAL CIRCUITRY TYPE PER FUNCTION | INDUCTANCE-CAPACITANCE-RESISTANCE BLANK |
| REFERENCE FREQUENCY PER FUNCTION | 195.0 KILOHERTZ BLANK |
| SOURCE IMPEDANCE RATING PER FUNCTION | 0.001 KILOHMS BLANK |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 1.00 KILOHERTZ BLANK AND 390.00 KILOHERTZ BLANK AND 450.00 KILOHERTZ BLANK AND 900.00 KILOHERTZ BLANK |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| TEST DATA DOCUMENT | 13499-673-1170-010 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |