| BODY HEIGHT | 1.750 INCHES MAXIMUM |
| BODY MATERIAL | METAL |
| BODY OUTSIDE DIAMETER | 0.438 INCHES NOMINAL |
| BODY SURFACE TREATMENT | TIN |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 60.0 MINIMUM BLANK AND 3.0 NOMINAL BLANK 1ST FUNCTION |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.750 INCHES NOMINAL |
| DISTANCE BETWEEN MOUNTING SURFACE AND LOWER END | 0.600 INCHES NOMINAL |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG GROUND 3RD FUNCTION |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG INPUT 1ST FUNCTION |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG OUTPUT 2ND FUNCTION |
| FREQUENCY BAND WIDTH PER FUNCTION | 499.65 KILOHERTZ BLANK AND 500.35 KILOHERTZ BLANK |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| INPUT IMPEDANCE PER FUNCTION W/LOAD | 1.0 KILOHMS BLANK |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 8.0 BLANK |
| OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | 330.0 OHMS BLANK |
| OVERALL HEIGHT | 2.475 INCHES MAXIMUM |
| OVERALL LENGTH | 1.126 INCHES NOMINAL |
| OVERALL WIDTH | 0.672 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| OPERATING TEMP RANGE | -30.0 TO 80.0 CELSIUS |
| PRINCIPAL CIRCUITRY TYPE PER FUNCTION | INDUCTANCE-CAPACITANCE-RESISTANCE BLANK |
| REFERENCE FREQUENCY PER FUNCTION | 500.0 KILOHERTZ BLANK |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 493.20 KILOHERTZ BLANK AND 499.65 KILOHERTZ BLANK AND 500.35 KILOHERTZ BLANK AND 506.80 KILOHERTZ BLANK |
| STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| TEST DATA DOCUMENT | 58189-810002-235 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.128 INCHES NOMINAL |