| FUSE ACCOMMODATION QUANTITY | 2 |
| CURRENT CARRYING RATING IN AMPS | 30.0 |
| VOLTAGE IN VOLTS | 250.0 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| TERMINAL TYPE AND QUANTITY | 4 THREADED STUD |
| CONTACT MATERIAL | ANY ACCEPTABLE |
| BODY STYLE | PANEL MOUNTED TYPE |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| CONTACT SURFACE TREATMENT | SILVER PLATED, QQ-S-365 |
| OVERALL LENGTH | 3.750 INCHES MINIMUM AND |
| 4.000 INCHES MAXIMUM |
| OVERALL HEIGHT | 1.812 INCHES MINIMUM AND |
| 1.817 INCHES MAXIMUM |
| OVERALL WIDTH | 1.180 INCHES MINIMUM AND |
| 1.185 INCHES MAXIMUM |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 0.798 INCHES MINIMUM AND |
| 0.828 INCHES MAXIMUM |
| MOUNTING HOLE STYLE | 2 BUSHING MOUNTING W/2 HOLES |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | 0.933 INCHES MINIMUM AND |
| 0.943 INCHES MAXIMUM |
| BUSHING HOLE DIAMETER | 0.869 INCHES MINIMUM AND |
| 0.879 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES | 0.795 INCHES MINIMUM AND |
| 0.805 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN KEYWAY AND BUSHING HOLE | 0.464 INCHES MINIMUM AND |
| 0.474 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 2 |
| MOUNTING HOLE DIAMETER | 0.151 INCHES MINIMUM AND |
| 0.161 INCHES MAXIMUM |
| ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL |
| ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL |
| INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| RESISTOR RATING | 330.0 OHMS |
| INDICATING LAMP VOLTAGE RANGE IN VOLTS | 23.0 TO 33.0 |
| ENVIRONMENTAL PROTECTION | DRIPPROOF |
| TEST DATA DOCUMENT | 81349-MIL-F-19207/18 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| BODY MATERIAL | PLASTIC, DIALLYL PHTHALATE, MIL-M-14, TYPE SDG |
| SPEC/STD CONTROLLING DATA | |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FHL29G-002 |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-19207/18 |