| FUSE ACCOMMODATION QUANTITY | 1 |
| CURRENT CARRYING RATING IN AMPS | 30.0 |
| VOLTAGE IN VOLTS | 45.0 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| TERMINAL TYPE AND QUANTITY | 2 THREADED STUD |
| CONTACT MATERIAL | ANY ACCEPTABLE |
| BODY STYLE | REAR PANEL MOUNTED TYPE |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| CONTACT SURFACE TREATMENT | ANY ACCEPTABLE |
| OVERALL LENGTH | 3.750 INCHES MINIMUM AND |
| 4.000 INCHES MAXIMUM |
| OVERALL HEIGHT | 1.200 INCHES MINIMUM AND |
| 1.205 INCHES MAXIMUM |
| OVERALL WIDTH | 1.068 INCHES MINIMUM AND |
| 1.072 INCHES MAXIMUM |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 0.798 INCHES MINIMUM AND |
| 0.828 INCHES MAXIMUM |
| MOUNTING HOLE STYLE | BUSHING MOUNTING W/2 HOLES AND KEYWAY |
| KEYWAY WIDTH | 0.203 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 0.745 INCHES MINIMUM AND |
| 0.755 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | 0.870 INCHES MINIMUM AND |
| 0.880 INCHES MAXIMUM |
| BUSHING HOLE DIAMETER | 0.870 INCHES MINIMUM AND |
| 0.880 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN KEYWAY AND BUSHING HOLE | 0.432 INCHES MINIMUM AND |
| 0.442 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 2 |
| MOUNTING HOLE DIAMETER | 0.151 INCHES MINIMUM AND |
| 0.161 INCHES MAXIMUM |
| ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL |
| ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL |
| INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| LENS COLOR | AMBER |
| RESISTOR RATING | 680.0 OHMS |
| INDICATING LAMP VOLTAGE RANGE IN VOLTS | 34.0 TO 45.0 |
| ENVIRONMENTAL PROTECTION | DRIPPROOF |
| TEST DATA DOCUMENT | 81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-F-19207/19 GOVERNMENT SPECIFICATION |
| SPEC/STD CONTROLLING DATA | |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FHL30G-3 |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-19207/19 |