| ACCOMMODATED FUSE LENGTH | 3.188 INCHES NOMINAL |
| ACCOMMODATED FUSE THICKNESS | 0.094 INCHES MAXIMUM |
| ACCOMMODATED FUSE WIDTH | 0.750 INCHES NOMINAL |
| BASE THICKNESS | 0.580 INCHES MAXIMUM |
| BODY MATERIAL | PLASTIC, POLYESTER, MIL-M-14, TYPE MAI-60 AND PLASTIC, SILICONE, MIL-M-14, TYPE MSI-30 |
| BODY STYLE | OPEN TYPE |
| CENTER TO CENTER DISTANCE BETWEEN FUSE CONTACTS | 2.433 INCHES MINIMUM AND 2.443 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| CONTACT MATERIAL | STEEL |
| CONTACT SURFACE TREATMENT | CADMIUM, QQ-P-416 |
| CURRENT CARRYING RATING IN AMPS | 500.0 |
| FUSE ACCOMMODATION QUANTITY | 1 |
| FUSE TERMINAL TYPE ACCOMMODATED | SLOTTED LUG |
| INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | 1 POLE, MAINLINE, FUSED |
| OVERALL HEIGHT | 1.922 INCHES MAXIMUM |
| OVERALL LENGTH | 3.943 INCHES MAXIMUM |
| OVERALL WIDTH | 0.907 INCHES MINIMUM AND 0.969 INCHES MAXIMUM |
| MOUNTING HOLE DIAMETER | 0.190 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 2 |
| MOUNTING HOLE STYLE | IN-LINE ALONG THE LENGTH |
| SCREW THREAD DIAMETER | 0.312 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 24.0 |
| TERMINAL TYPE AND QUANTITY | 2 THREADED STUD |
| TERMINAL MATERIAL | CADMIUM, QQ-P-416 AND SILVER PLATED, QQ-S-365 |
| TERMINAL SURFACE TREATMENT | STEEL, MIL-S-6050 |
| TEST DATA DOCUMENT | 81349-MIL-F-5373C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| VOLTAGE IN VOLTS | 41.0 |