5925-00-062-3354, CIRCUIT BREAKER

5905-00-062-3353 RESISTOR,VARIABLE,WIRE WOUND,PR

National Stock Number:
5925-00-062-3354

Federal Supply Class:
5925

National Item Identification Number:
000623354

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

3XAM17-2-5-208-400-55	74193	EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV
DMS 83059B	16236	DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS)
S271MS183P002	04164	RAYTHEON COMPANY
S271MS183P002	3B150	RAYTHEON COMPANY
S271MS183P002	49956	RAYTHEON COMPANY
S271MS183P002	54X10	RAYTHEON COMPANY

Techincal Specification:

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	1.812 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.750 INCHES NOMINAL
ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT EACH POLE
BODY LENGTH	2.500 INCHES NOMINAL
BODY STYLE	MULTIPOLE-MULTIPLE ACTUATOR TYPE
BODY WIDTH	2.273 INCHES NOMINAL
CASE MATERIAL	PLASTIC
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.190 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.750 INCHES NOMINAL
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
EXTERNAL ACTUATOR LINKAGE ARRANGEMENT	ONE, TWO, AND THREE LINKED
FREQUENCY IN HERTZ	400.0 ALL LOCATIONS
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	EXPLOSION RESISTANT
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.000 INCHES NOMINAL
NOMINAL THREAD SIZE	0.138 INCHES
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	208.0 AC ALL LOCATIONS
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
MANUAL ACTUATOR TYPE AND QUANTITY	3 TOGGLE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	2.5 AMPERES AC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	3500.0 AC ALL LOCATIONS
MOUNTING FACILITY TYPE AND QUANTITY	6 THREADED HOLE
RESET METHOD	MANUAL
POLE QUANTITY	3
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	2.000 MINIMUM AT 200 PCT AND 8.500 MAXIMUM AT 200 PCT ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS
TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	150.0 ALL LOCATIONS
ULTIMATE TRIP TIME PER POLE IN SECONDS	10.000 MINIMUM AND 30.000 MAXIMUM ALL LOCATIONS
TERMINAL TYPE AND QUANTITY	6 SCREW

Click here to Register for Free 30-day Trial