| NOMINAL THREAD SIZE | 0.138 INCHES |
| CIRCUIT PROTECTION TYPE | OVERCURRENT ALL LOCATIONS |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 1.375 INCHES NOMINAL |
| TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | 50.000 MINIMUM AT 200 PCT AND 200.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP ALL LOCATIONS |
| RESET METHOD | MANUAL |
| ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 125.0 ALL LOCATIONS |
| OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 600.0 AC ALL LOCATIONS |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.375 INCHES NOMINAL |
| BODY WIDTH | 4.125 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 60.0 ALL LOCATIONS |
| TERMINAL TYPE AND QUANTITY | 6 THREADED STUD |
| ACTUATOR POSITION DESIGNATION | AT POLE TWO |
| POLE QUANTITY | 3 |
| MOUNTING FACILITY TYPE AND QUANTITY | 6 THREADED HOLE |
| THREAD QUANTITY PER INCH | 32 |
| BOSS HEIGHT | 0.187 INCHES NOMINAL |
| MANUAL ACTUATOR TYPE AND QUANTITY | 1 TOGGLE |
| TRIP RELEASE CHARACTERISTIC | TIME DELAY ALL LOCATIONS |
| MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 25.0 AMPERES AC ALL LOCATIONS |
| BODY STYLE | MULTIPOLE-SINGLE ACTUATOR TYPE |
| ACTUATOR FUNCTION | TRIP-RESET |
| INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | MOISTURE RESISTANT |
| MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | 15000.0 AC ALL LOCATIONS |
| TRIP RELEASE METHOD | MAGNETIC ALL LOCATIONS |
| CASE MATERIAL | PLASTIC |
| BODY LENGTH | 8.750 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 7.812 INCHES NOMINAL |
| MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE |
| THREAD SERIES DESIGNATOR | UNC |
| BODY HEIGHT | 3.500 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 7.812 INCHES NOMINAL |