| ACTUATOR FREE POSITION HEIGHT | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| ACTUATOR HEIGHT | 0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ACTUATOR LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| ACTUATOR STYLE | RECTANGULAR |
| ACTUATOR WIDTH | 0.281 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| ACTUATOR MOVEMENT | 0.060 PRETRAVEL INCHES MAXIMUM AND 0.015 OVERTRAVEL INCHES MINIMUM AND 0.027 DIFFERENTIAL INCHES MAXIMUM |
| BODY HEIGHT | 0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| BODY LENGTH | 1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM |
| BODY STYLE | HOLE MOUNTED |
| BODY WIDTH | 0.515 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.309 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.517 INCHES MINIMUM AND 0.523 INCHES MAXIMUM |
| CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 10.000 AMPERES RESISTIVE DC AND 10.000 AMPERES INDUCTIVE DC AND 6.000 AMPERES MOTOR DC AND 10.000 AMPERES RESISTIVE AC AND 10.000 AMPERES INDUCTIVE AC AND 6.000 AMPERES MOTOR AC |
| INCLOSURE TYPE | UNINCLOSED |
| OVERALL HEIGHT | 0.598 INCHES NOMINAL |
| OVERALL LENGTH | 1.812 INCHES MAXIMUM |
| OVERALL WIDTH | 0.515 INCHES MAXIMUM |
| MAXIMUM VOLTAGE RATING IN VOLTS | 115.0 AC AND 28.0 DC |
| MOUNTING METHOD | UNTHREADED HOLE |
| NONPILE-UP CONTACT ARRANGEMENT | 1 TWO CIRCUIT, DOUBLE BREAK/DOUBLE MAKE, ONE POSITION MOMENTARY SINGLE SWITCH UNIT |
| SWITCH ACTUATING FORCE | 20.0 OUNCES MAXIMUM |
| SWITCH RELEASE FORCE | 2.0 OUNCES MINIMUM |
| TERMINAL TYPE AND QUANTITY | 4 SCREW |
| TEST DATA DOCUMENT | 81349-MILS8805 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.101 INCHES MINIMUM AND 0.104 INCHES MAXIMUM |