| BODY THICKNESS | 0.063 INCHES NOMINAL |
| CONTACT LOAD CURRENT RATING | 350.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE |
| CONTACT LOAD CURRENT RATING | 50.0 MILLIAMPERES RESISTIVE LOAD HIGHEST AC VOLTAGE RATING AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 500.0 MILLIAMPERES RESISTIVE LOAD AND 50.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 100.0 MILLIAMPERES RESISTIVE LOAD AC AT ALTITUDE |
| CONTACT LOAD CURRENT RATING | 250.0 MILLIAMPERES RESISTIVE LOAD LOWEST AC VOLTAGE RATING AT SEA LEVEL |
| CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS SINGLE SECTION FRONT |
| CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS SINGLE SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT ALTITUDE |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 LOWEST AC VOLTAGE RATING AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT ALTITUDE |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 300.0 HIGHEST AC VOLTAGE RATING AT SEA LEVEL |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.362 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.562 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| OVERALL HEIGHT | 1.859 INCHES MAXIMUM |
| OVERALL WIDTH | 1.734 INCHES MAXIMUM |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE SINGLE MOUNTING FACILITY |
| MOUNTING METHOD | STRUT AND UNTHREADED HOLE SINGLE MOUNTING FACILITY |
| OPERATING TEMP RANGE | -55.0 TO 85.0 CELSIUS |
| POLE QUANTITY | 1 SINGLE SECTION FRONT |
| POLE QUANTITY | 1 SINGLE SECTION REAR |
| STYLE DESIGNATOR | SWITCH SECTION, ROTARY |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THROW QUANTITY | 5 SINGLE SECTION FRONT |
| THROW QUANTITY | 5 SINGLE SECTION REAR |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.126 INCHES NOMINAL SINGLE MOUNTING FACILITY |