| CONTACT LOAD CURRENT RATING | 10.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES SINGLE SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 12.0 DC AT SEA LEVEL |
| FEATURES PROVIDED | METALLIC INCLOSURE |
| FIRST FLAT LENGTH | 0.322 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.154 INCHES MINIMUM SINGLE ACTUATOR AND 0.158 INCHES MAXIMUM SINGLE ACTUATOR |
| III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT |
| INDIVIDUAL SECTION QUANTITY | 1 |
| POLE QUANTITY | 1 SINGLE SECTION REAR |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.438 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE TYPE | FLATTED BUSHING AT 3:00 O'CLOCK |
| OVERALL HEIGHT | 1.875 INCHES NOMINAL |
| OVERALL LENGTH | 2.090 INCHES NOMINAL |
| OVERALL WIDTH | 1.250 INCHES NOMINAL |
| SHAFT DIAMETER | 0.247 INCHES MINIMUM SINGLE ACTUATOR AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT LENGTH | 0.640 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 0.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 3 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | QUICK DISCONNECT, MALE |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.285 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 28 SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UN SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 2 SINGLE SECTION REAR |