| TEST DATA DOCUMENT | 81349-MIL-S-6743 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 96906-MS25253 GOVERNMENT STANDARD |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-S-6743 |
| MANUFACTURERS CODE | 96906 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS25253-4 |
| MAXIMUM VOLTAGE RATING IN VOLTS | 115.0 AC AND |
| 28.0 DC |
| CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 10.000 AMPERES RESISTIVE DC AND |
| 6.000 AMPERES INDUCTIVE DC AND |
| 6.000 AMPERES MOTOR DC AND |
| 10.000 AMPERES RESISTIVE AC AND |
| 10.000 AMPERES INDUCTIVE AC AND |
| 6.000 AMPERES MOTOR AC |
| BODY STYLE | HOLE MOUNTED |
| ACTUATOR STYLE | RECTANGULAR |
| INCLOSURE TYPE | FULLY INCLOSED |
| CASE MATERIAL | PLASTIC |
| TERMINAL TYPE AND QUANTITY | 3 TAB W/SCREW |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.875 INCHES NOMINAL |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY SINGLE SWITCH UNIT |
| BODY LENGTH | 1.094 INCHES NOMINAL |
| BODY WIDTH | 0.415 INCHES MAXIMUM |
| BODY HEIGHT | 0.625 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.406 INCHES NOMINAL |
| OVERALL LENGTH | 1.375 INCHES NOMINAL |
| OVERALL WIDTH | 0.415 INCHES MAXIMUM |
| OVERALL HEIGHT | 0.875 INCHES NOMINAL |
| ACTUATOR LENGTH | 0.110 INCHES NOMINAL |
| ACTUATOR HEIGHT | 0.109 INCHES NOMINAL |
| ACTUATOR WIDTH | 0.165 INCHES NOMINAL |
| ACTUATOR FREE POSITION HEIGHT | 0.625 INCHES MAXIMUM |
| SWITCH ACTUATING FORCE | 14.0 OUNCES MAXIMUM |
| ACTUATOR MOVEMENT | 0.046 PRETRAVEL INCHES MAXIMUM AND |
| 0.031 OVERTRAVEL INCHES MINIMUM AND |
| 0.020 DIFFERENTIAL INCHES MAXIMUM |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.114 INCHES NOMINAL |