| CONTACT ACTION STIMULUS | INCREASE |
| CONTACT ADJUSTABILITY | DEACTUATION POINT NOT ADJUSTABLE AND ACTUATION POINT NOT ADJUSTABLE |
| CONTACT LOAD CURRENT RATING | 3.0 AMPERES RESISTIVE LOAD AND 1.0 AMPERES INDUCTIVE LOAD SECOND VOLTAGE |
| CONTACT LOAD CURRENT RATING | 3.0 AMPERES RESISTIVE LOAD AND 1.0 AMPERES INDUCTIVE LOAD FIRST VOLTAGE |
| CONTACT STIMULUS RATING | 2850.00 ACTUATION POINT NOMINAL POUNDS PER SQUARE INCH GAGE AND 2550.00 DEACTUATION POINT NOMINAL POUNDS PER SQUARE INCH GAGE AND 300.00 DIFFERENTIAL POINT NOMINAL POUNDS PER SQUARE INCH GAGE |
| CONTACT VOLTAGE RATING IN VOLTS | 18.0 DC AT SEA LEVEL SECOND VOLTAGE |
| CONTACT VOLTAGE RATING IN VOLTS | 30.0 DC AT SEA LEVEL FIRST VOLTAGE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 2.370 INCHES NOMINAL |
| INSIDE DIAMETER | 0.438 INCHES NOMINAL SINGLE CONNECTION |
| OVERALL HEIGHT | 2.030 INCHES MAXIMUM |
| OVERALL LENGTH | 2.750 INCHES MAXIMUM |
| OVERALL WIDTH | 3.590 INCHES MAXIMUM |
| MEDIA FOR WHICH DESIGNED | LIQUID |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| MOUNTING METHOD | BRACKET AND UNTHREADED HOLE |
| NOMINAL THREAD SIZE | 0.4375 INCHES SINGLE PRESSURE CONNECTION |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| OPERATING TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM |
| PRESSURE CONNECTOR TYPE | PLAIN, THREADED INTERNAL SINGLE CONNECTION |
| PRESSURE SWITCH TYPE | GAGE |
| PROOF PRESSURE | 4500.00 POUNDS PER SQUARE INCH GAGE |
| SENSING ELEMENT BURST PRESSURE | 7500.00 POUNDS PER SQUARE INCH GAGE |
| SPECIAL FEATURES | CENTER MTG HOLE SPACED 1.310 IN. C TO C FROM TWO OUTER MTG HOLES |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-9395/1 GOVERNMENT SPECIFICATION |
| STYLE DESIGNATOR | RECTANGULAR W/BRACKET |
| TERMINAL TYPE | CONNECTOR, RECEPTACLE |
| TEST DATA DOCUMENT | 81349-MIL-S-9395 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3B SINGLE PRESSURE CONNECTION |
| THREAD QUANTITY PER INCH | 20 SINGLE PRESSURE CONNECTION |
| THREAD SERIES DESIGNATOR | UNF SINGLE PRESSURE CONNECTION |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.208 INCHES NOMINAL |