| MATING END QUANTITY | 1 |
| CONTACT POSITION ARRANGEMENT STYLE | 28-8 SINGLE MATING END |
| INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END 1ST CONTACT GROUPING |
| 2 SINGLE MATING END 2ND CONTACT GROUPING |
| 9 SINGLE MATING END 3RD CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS |
| TERMINAL LOCATION | BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| BODY STYLE | ANGLE SHAPE, W/O CABLE CLAMP |
| OVERALL DIAMETER | 1.969 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE TO CONNECTOR END | 2.634 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE TO CABLE END | 2.188 INCHES MAXIMUM |
| BODY ANGLE IN DEG | 90.0 |
| CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING |
| THREADED DEVICE TYPE | BACK SHELL AND |
| COUPLING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF AND |
| UNS |
| NOMINAL THREAD SIZE | 1.438 INCHES AND |
| 1.750 INCHES |
| THREAD CLASS | 2A AND |
| 2B |
| THREAD QUANTITY PER INCH | 18 |
| THREAD DIRECTION | RIGHT-HAND |
| NOMINAL THREAD LENGTH | 0.375 INCHES AND |
| 0.625 INCHES |
| SHELL TYPE | SOLID |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | CADMIUM AND |
| CHROMATE |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| INSERT POSITION IN DEG | 0.0 |
| INSERT MATERIAL | RUBBER SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 22.0 SINGLE MATING END 1ST CONTACT GROUPING |
| 41.0 SINGLE MATING END 2ND CONTACT GROUPING |
| 22.0 SINGLE MATING END 3RD CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 900.0 SINGLE MATING END 1ST CONTACT GROUPING |
| 1250.0 SINGLE MATING END 2ND CONTACT GROUPING |
| 500.0 SINGLE MATING END 3RD CONTACT GROUPING |
| CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 1250.0 SINGLE MATING END 1ST CONTACT GROUPING |
| 1750.0 SINGLE MATING END 2ND CONTACT GROUPING |
| 700.0 SINGLE MATING END 3RD CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT | GOLD AND |
| NICKEL SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 1,GRADE B MIL SPEC 1ST TREATMENT RESPONSE AND |
| QQ-N-290,CLASS 1,GRADE B FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS |
| FEATURES PROVIDED | PRE-TINNED TERMINAL |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND |
| SALT WATER RESISTANT AND |
| VIBRATION PROOF AND |
| SHOCK RESISTANT AND |
| COLD RESISTANT AND |
| HEAT RESISTANT AND |
| EXPLOSION PROOF |
| TEST DATA DOCUMENT | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| OPERATING TEMP RATING | -55.0 DEG CELSIUS MINIMUM AND |
| 125.0 DEG CELSIUS MAXIMUM |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.020 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL AND LOCATION | CONTCT SURFACES GOLD |
| SPECIFICATION/STANDARD DATA | 96906-MS3108 GOVERNMENT STANDARD |