5961-00-081-8750 SEMICONDUCTOR DEVICE SET Index 5910-00-081-8759 CAPACITOR,FIXED,PAPER DIELECTRIC

National Stock Number:
5935-00-081-8754

Federal Supply Class:
5935

National Item Identification Number:
000818754

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.


Manufacturer Information:
B52000123888818KEARFOTT CORPORATION
MIL-DTL-2648281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS3119E22-55Z96906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
PTB-22-55PSZ(001)77820AMPHENOL CORP


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.688 INCHES MINIMUM AND 0.719 INCHES MAXIMUM
BODY STYLESTRAIGHT SHAPE W/FLANGE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT1.250 INCHES NOMINAL
CONNECTOR LOCKING METHODBAYONET PIN
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS600.0 ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT POSITION ARRANGEMENT STYLE22-55 ALL MATING ENDS
CONTACT REMOVABILITYNONREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENTGOLD AND COPPER ALL MATING ENDS ALL CONTACT GROUPINGS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.250 INCHES NOMINAL
ENVIRONMENTAL PROTECTIONMOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT
INCLUDED CONTACT QUANTITY55 ALL MATING ENDS SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPEROUND PIN 1ST MATING END ALL CONTACT GROUPINGS
INCLUDED CONTACT TYPEROUND SOCKET 2ND MATING END ALL CONTACT GROUPINGS
INSERT POSITION IN DEG314.0
OVERALL HEIGHT1.578 INCHES MAXIMUM
OVERALL LENGTH1.406 INCHES MAXIMUM
OVERALL WIDTH1.578 INCHES MAXIMUM
MATING END QUANTITY2
POLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PRECIOUS MATERIAL AND WEIGHT0.055 GOLD GRAINS, TROY
PRECIOUS MATERIALGOLD
SHELL MATERIALALUMINUM ALLOY
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL SURFACE TREATMENTCADMIUM
SHELL TYPESOLID
SPECIFICATION/STANDARD DATA81349-MIL-C-26482 GOVERNMENT SPECIFICATION
TEST DATA DOCUMENT81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us