|
|
|
National Stock Number:
5935-00-086-5560
Federal Supply Class:
5935
National Item Identification Number:
000865560
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 167-9912 | 99747 | TELEDYNE DEFENSE ELECTRONICS, LLC | | 846905-3 | 00779 | TE CONNECTIVITY CORPORATION | | 846905-3 | 2H631 | TE CONNECTIVITY CORPORATION |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.546 INCHES MINIMUM AND 1.566 INCHES MAXIMUM | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.546 INCHES MINIMUM AND 1.566 INCHES MAXIMUM | | INCLUDED CONTACT QUANTITY | 8 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT MATERIAL | GLASS SINGLE MATING END | | INSERT POSITION IN DEG | 0.0 | | OVERALL HEIGHT | 1.860 INCHES MINIMUM AND 1.900 INCHES MAXIMUM | | OVERALL LENGTH | 2.220 INCHES MINIMUM AND 2.260 INCHES MAXIMUM | | OVERALL WIDTH | 1.860 INCHES MINIMUM AND 1.900 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 1.188 INCHES | | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE | | SHELL MATERIAL | STEEL | | SHELL TYPE | SOLID | | SPECIAL FEATURES | HERMETIC SEALED | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNS | | THREADED DEVICE TYPE | BACK SHELL | | UNTHREADED MOUNTING HOLE DIAMETER | 0.164 INCHES MINIMUM |
|
|