|
|
|
National Stock Number:
5935-00-087-5761
Federal Supply Class:
5935
National Item Identification Number:
000875761
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 33-7071-1 | 74868 | AMPHENOL CORPORATION | | 3470876H01 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 3470876H01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 7071-1 | 60674 | MICROWAVE DEVICES INC | | UG1415PARENU | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM | | UG1415U | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM | | UG1415U | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CABLE ENTRANCE DIAMETER | 0.205 INCHES NOMINAL | | CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT | | CONNECTOR LOCKING METHOD | BAYONET PIN | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM FREQUENCY RATING | 10.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT POSITION ARRANGEMENT STYLE | TPS SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT MATERIAL | PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END | | INSERT POSITION IN DEG | 120.0 AND 240.0 | | OVERALL DIAMETER | 0.375 INCHES NOMINAL | | OVERALL LENGTH | 0.875 INCHES NOMINAL | | MATING END QUANTITY | 1 | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD AND SHELL SURFACE SILVER | | PRECIOUS MATERIAL | GOLD AND SILVER | | PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS, TROY AND 0.100 SILVER GRAINS, TROY | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING | | SHELL MATERIAL | COPPER | | SHELL SURFACE TREATMENT | SILVER | | SHELL TYPE | SOLID | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
|
|