| TEST DATA DOCUMENT | 81349-MIL-S-12883 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFIC EQUIPMENT ACCOMMODATED | ELECTRON TUBE |
| CONTACT MAXIMUM VOLTAGE IN VOLTS AND CURRENT TYPE | 500.0 AC AND |
| 500.0 DC |
| FABRICATION METHOD | MOLDED |
| CONTACT RESISTANCE IN OHMS | 0.015 |
| TEMP RATING | 100.0 DEG CELSIUS |
| SADDLE MATERIAL | BRASS |
| SADDLE SURFACE TREATMENT | TIN |
| BASE SHIELD MATERIAL | BRASS |
| BASE SHIELD SURFACE TREATMENT | TIN |
| CENTER SHIELD MATERIAL | BRASS |
| CENTER SHIELD SURFACE TREATMENT | TIN |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.007 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-12883/2 GOVERNMENT SPECIFICATION |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILS12883-2 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M12883-02-02 |
| CONTACT POSITION ARRANGEMENT STYLE | MINIATURE |
| ACCOMMODATED CONTACT QUANTITY | 7 |
| TERMINAL TYPE AND QUANTITY | 7 TAB, SOLDER LUG |
| BODY STYLE | TOP MOUNT W/METAL SADDLE AND SHIELD BASE |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 1.0 |
| CONTACT MATERIAL | BERYLLIUM COPPER |
| CONTACT SURFACE TREATMENT | GOLD AND |
| COPPER |
| OVERALL LENGTH | 1.125 INCHES MAXIMUM |
| OVERALL HEIGHT | 1.188 INCHES MAXIMUM |
| OVERALL WIDTH | 0.795 INCHES MINIMUM AND |
| 0.805 INCHES MAXIMUM |
| PROJECTION LENGTH BELOW MOUNTING SURFACE | 0.547 INCHES MAXIMUM |
| BODY MATERIAL | PLASTIC |
| MOUNTING TYPE FOR WHICH DESIGNED | CHASSIS |
| MOUNTING METHOD | SADDLE |
| MOUNTING HOLE STYLE | ROUND, W/TWO MOUNTING HOLES |
| MOUNTING HOLE DIAMETER | 0.120 INCHES MINIMUM AND |
| 0.130 INCHES MAXIMUM |
| BODY MOUNTING HOLE ACCOMMODATION DIAMETER | 0.620 INCHES MAXIMUM |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 0.870 INCHES MINIMUM AND |
| 0.880 INCHES MAXIMUM |
| COMPONENT SHIELD MOUNTING METHOD | BEAD |
| POLARIZATION TYPE | SLOT |
| FEATURES PROVIDED | CENTER SHIELD |