|
|
|
National Stock Number:
5935-00-133-0522
Federal Supply Class:
5935
National Item Identification Number:
001330522
Description:
INSERT,ELECTRICAL CONNECTOR
Detail:
An insulating element with or without contact(s) designed to fit into an ADAPTER (2), CONNECTOR; CONNECTOR BODY, PLUG, ELECTRICAL; CONNECTOR BODY, RECEPTACLE, ELECTRICAL; CONNECTOR, PLUG, ELECTRICAL; or CONNECTOR, RECEPTACLE, ELECTRICAL forming an integral liner or seat. Excludes INSULATOR (1), DISK; INSULATOR (1) PLATE; TERMINAL (1), FEEDTHRU and TERMINAL BOARD. See also CONNECTOR (as modified); CONNECTOR BODY (as modified); and INSERT MODULE, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 7648704P004 | 03538 | LOCKHEED MARTIN CORPORATION | | M28748/3-L0002A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M28748/3L0002A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-28748/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC28748 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS18189-1 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | RECTANGULAR SHAPE | | CONTACT POSITION ARRANGEMENT STYLE | 25-104 SINGLE MATING END | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM | | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 2.367 INCHES MINIMUM AND 2.383 INCHES MAXIMUM | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-M-19833 TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END | | OVERALL HEIGHT | 0.506 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | OVERALL LENGTH | 2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM | | OVERALL WIDTH | 1.521 INCHES MINIMUM AND 1.541 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | POLARIZATION METHOD | MATING END | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-28748 GOVERNMENT SPECIFICATION | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | TEST DATA DOCUMENT | 81349-MIL-C-28748 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|