|
|
|
National Stock Number:
5940-00-081-1477
Federal Supply Class:
5940
National Item Identification Number:
000811477
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 1856938PC4 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 4-140 FFPE | 71785 | CINCH CONNECTIVITY SOLUTIONS INC. | | 600-4 HPSI | 83330 | DIALIGHT CORPORATION | | 600-JJ-04-SI | 26405 | REGAL BELOIT AMERICA, INC | | NA741929-4 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 3.0 | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.188 INCHES | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.312 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.141 INCHES | | BASE THICKNESS | 0.250 INCHES | | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP | | BOARD HEIGHT EXCLUDING TERMINALS | 0.250 INCHES | | BOARD OVERALL HEIGHT | 0.406 INCHES | | BOARD OVERALL LENGTH | 2.172 INCHES | | BOARD OVERALL WIDTH | 0.875 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.875 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.312 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.375 INCHES | | CURRENT RATING IN AMPS | 15.0 | | MATERIAL | COPPER ALLOY TERMINALS | | MATERIAL | PLASTIC BOARD | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE DIAMETER | 0.156 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | NONFEEDTHRU TERMINAL QUANTITY | 8 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 859 SINGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-N-290,CLASS 1,TYPE 7 FED SPEC SINGLE TREATMENT RESPONSE TERMINALS | | SURFACE TREATMENT | NICKEL TERMINALS | | TERMINAL CONNECTING LINK TYPE | 2 SINGLE | | TERMINAL CONNECTING LINK QUANTITY | 4 SINGLE | | TERMINAL DESIGN | LINKED NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW | | TERMINAL ROW QUANTITY | 2 | | TEST DATA DOCUMENT | 10001-1856-938 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|