|
|
|
National Stock Number:
5955-00-088-1995
Federal Supply Class:
5955
National Item Identification Number:
000881995
Description:
CRYSTAL UNIT,QUARTZ
Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
|
Manufacturer Information:
| 290-8734-00 | 13499 | ROCKWELL COLLINS, INC. | | 290-9063-000 | 13499 | ROCKWELL COLLINS, INC. | | CR18/U8M677500 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-3098/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-3098/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | S290-9063-00 | 01281 | TRW ELECTRONICS AND DEFENSE SECTOR RF DEVICES | | S290-9063-000 | 01281 | TRW ELECTRONICS AND DEFENSE SECTOR RF DEVICES |
|
Techincal Specification:
| DRIVE LEVEL RATING | 8.0 MILLIWATTS MINIMUM AND 12.0 MILLIWATTS MAXIMUM | | BODY LENGTH | 0.775 INCHES MAXIMUM | | BODY WIDTH | 0.725 INCHES MAXIMUM | | BODY THICKNESS | 0.317 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.478 INCHES MINIMUM AND 0.494 INCHES MAXIMUM | | CIRCUIT RESONANCE | ANTIRESONANCE | | EQUIVALENT RESISTANCE VALUE IN OHMS | 24.0 MAXIMUM | | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 | | LOAD CAPACITANCE IN PICOFARADS | 31.5 MINIMUM AND 32.5 MAXIMUM | | OVERALL LENGTH | 0.998 INCHES MINIMUM AND 1.023 INCHES MAXIMUM | | OVERALL THICKNESS | 0.352 INCHES MAXIMUM | | OVERALL WIDTH | 0.757 INCHES MAXIMUM | | MODE OF OSCILLATION | FUNDAMENTAL | | OPERATING TEMP RANGE | -55.0 TO 105.0 CELSIUS | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-3098/3 GOVERNMENT SPECIFICATION | | SPECIFIED FREQUENCY | 8.6775 MEGAHERTZ | | STYLE DESIGNATOR | OVAL BODY, PIN TERMINALS | | TERMINAL LENGTH | 0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM | | TERMINAL DIAMETER | 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM | | TEST DATA DOCUMENT | 81349-MIL-C-3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|