|
|
|
National Stock Number:
5955-00-113-4884
Federal Supply Class:
5955
National Item Identification Number:
001134884
Description:
CRYSTAL UNIT,QUARTZ
Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
|
Manufacturer Information:
| CR-80/U92.000000MHZ | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CR80/U92M00000 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-3098/57 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC3098-57 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DRIVE LEVEL RATING | 1.6 MILLIWATTS MINIMUM AND 2.4 MILLIWATTS MAXIMUM | | BODY WIDTH | 0.402 INCHES MAXIMUM | | BODY THICKNESS | 0.150 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.184 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | CIRCUIT RESONANCE | SERIES RESONANCE | | EQUIVALENT RESISTANCE VALUE IN OHMS | 60.0 NOMINAL | | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 AND -0.003 TO 0.003 | | OVERALL LENGTH | 0.530 INCHES MAXIMUM | | OVERALL THICKNESS | 0.183 INCHES MAXIMUM | | OVERALL WIDTH | 0.435 INCHES MAXIMUM | | MODE OF OSCILLATION | FIFTH OVERTONE | | OPERATING TEMP RANGE | -55.0 TO 105.0 CELSIUS | | SHUNT CAPACITANCE IN PICOFARADS | 7.0 MAXIMUM | | SPECIFIED FREQUENCY | 92.000 MEGAHERTZ | | STYLE DESIGNATOR | OVAL BODY, WIRE LEADS | | TERMINAL DIAMETER | 0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM | | TERMINAL LENGTH | 1.500 INCHES MINIMUM | | TEST DATA DOCUMENT | 81349-MILC3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|