| DISTANCE FROM INTERSECTING CENTERLINE OF MAIN BODY TO END OF FIRST BRANCH | 1.400 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| ANGLE BETWEEN MAIN BODY AND FIRST BRANCH CENTERLINES IN DEG | 10.0 NOMINAL AS SUPPLIED |
| ANGLE BETWEEN MAIN BODY AND FIRST BRANCH CENTERLINES IN DEG | 30.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | 200.0 VOLTS PER MIL /0.001 INCH/ |
| DISTANCE FROM EDGE OF MAIN BODY TO INTERSECTING CENTERLINES | 0.750 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| FIRST BRANCH INSIDE DIAMETER | 0.210 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| FIRST BRANCH INSIDE DIAMETER | 0.400 INCHES MINIMUM AS SUPPLIED |
| FIRST BRANCH WALL THICKNESS | 0.060 INCHES MAXIMUM AS SUPPLIED |
| FIRST BRANCH WALL THICKNESS | 0.060 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| FLEXIBILITY | SEMIRIGID |
| MAIN BODY OVERALL LENGTH | 2.400 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| MAIN BODY WALL THICKNESS | 0.110 INCHES MAXIMUM AS SUPPLIED |
| MAIN BODY WALL THICKNESS | 0.110 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| MAIN BODY INSIDE DIAMETER | 0.740 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MAIN BODY INSIDE DIAMETER | 1.400 INCHES MINIMUM AS SUPPLIED |
| MATERIAL DOCUMENT AND CLASSIFICATION | RT-301, RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | PLASTIC POLYOLEFIN |
| MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SPECIAL FEATURES | MOLDING PORTS INCLUDED |
| STYLE DESIGNATOR | TRANSITION-45 DEGREES |
| TEMP RATING | -55.0 CELSIUS |