| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 KNOB W/DIAL |
| APPLICATION DESIGN | TRANSMISSION LINE |
| ATTENUATION PER STEP IN DECIBELS | 0.2 |
| ATTENUATION VARIATION METHOD | STEPPED |
| BODY STYLE | COAXIAL TYPE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE | 4.500 INCHES NOMINAL |
| COAXIAL CONNECTOR SERIES DESIGNATION | N |
| FREQUENCY RANGE | 0.000 HERTZ MINIMUM AND 1.000 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.8 |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | -0.20 TO 0.20 |
| OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 10.0 |
| OVERALL HEIGHT | 2.875 INCHES NOMINAL |
| OVERALL LENGTH | 6.938 INCHES NOMINAL |
| OVERALL WIDTH | 5.500 INCHES NOMINAL |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.190 INCHES |
| MOUNTING FACILITY PATTERN | ISOSCELES TRIANGLE |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 THREADED HOLE |
| MOUNTING THREAD QUANTITY | 32 PER INCH |
| POWER RATING | 2.0 WATTS AVERAGE |
| STEP POSITION QUANTITY | 50 |
| VOLTAGE STANDING WAVE RATIO | 1.50 |
| TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, COAXIAL, FEMALE AND 1 CONNECTOR, COAXIAL, MALE |
| TEST DATA DOCUMENT | 06845-4017479-0701 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |