|
|
National Stock Number: 5985-00-100-7935
Federal Supply Class: 5985
National Item Identification Number: 001007935
Description: ATTENUATOR,VARIABLE
Detail: A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
|
Manufacturer Information:
103197 | 99899 | NARDA HOLDINGS, INC. | 1128SCAV780-3 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | 1128SCAV780-3 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION | 395111-2 | 00752 | L3HARRIS TECHNOLOGIES, INC. | CN1373ALQ99V | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM |
|
Techincal Specification:
ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 MOTOR | APPLICATION DESIGN | TRANSMISSION LINE | ATTENUATION VARIATION METHOD | STEPPED | COAXIAL CONNECTOR SERIES DESIGNATION | N | FREQUENCY RANGE | 500.000 MEGAHERTZ MINIMUM AND 3.800 GIGAHERTZ MAXIMUM | IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT | INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.3 | OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 30.0 | MOUNTING FACILITY TYPE AND QUANTITY | 7 UNTHREADED HOLE | OPERATING TEMP RANGE | -54.0 TO 71.0 CELSIUS | STEP POSITION QUANTITY | 6 | VOLTAGE STANDING WAVE RATIO | 1.20 | UNTHREADED MOUNTING HOLE DIAMETER | 0.218 INCHES NOMINAL |
|
|