| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR INPUT CURRENT RATING | 33.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 88.0 MILLIWATTS MAXIMUM |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY STYLE | STANDARD ROUND A |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| BODY SIZE | 8 |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 408.00 MINIMUM AND |
| 552.00 MAXIMUM |
| ZRO IMPEDANCE ANGLE IN DEG | 1620.00 MINIMUM AND |
| 1980.00 MAXIMUM |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 69.70 MINIMUM AND |
| 9430.00 MAXIMUM |
| ZSO IMPEDANCE ANGLE IN DEG | 297.00 MINIMUM AND |
| 363.00 MAXIMUM |
| ZRS IMPEDANCE MAGNITUDE IN OHMS | 501.00 MINIMUM AND |
| 678.50 MAXIMUM |
| ZRS IMPEDANCE ANGLE IN DEG | 161.00 MINIMUM AND |
| 218.00 MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 328.00 MINIMUM AND |
| 402.00 MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 54.00 MINIMUM AND |
| 66.00 MAXIMUM |
| TRANSFORMATION RATIO | 2.203 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 12.00 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.00 CENTIMETER-GRAMS MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 1.6590 INCHES MAXIMUM |
| FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND |
| 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND |
| 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0430 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND |
| 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3600 INCHES MINIMUM AND |
| 0.3900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, STAINLESS |
| FRAGILITY FACTOR | MODERATELY RUGGED |