| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.00 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.00 CENTIMETER-GRAMS NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.0550 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 20.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.3700 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0430 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 11.500 INPUT TO OUTPUT NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 150.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 15.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 26.20 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 24.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 190.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 1.0 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.1197 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0150 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0150 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT LENGTH | 0.4570 INCHES MINIMUM AND 0.4850 INCHES MAXIMUM SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 7.50 NOMINAL |
| ZRO RESISTANCE IN OHMS | 32.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 55.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 7.30 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SOLDER STUD |
| TORQUE GRADIENT PER ANGULAR DEG | 0.034 INCH-OUNCES MINIMUM |
| TRANSFORMATION RATIO | 0.454 STATOR TO ROTOR NOMINAL |
| UNDERCUT DIAMETER | 0.7000 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |