| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.40 INCH-OUNCES NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.22 INCH-OUNCES NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND B |
| FLANGE DIAMETER | 1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.4100 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8480 INCHES NOMINAL |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| PLUS J ZSO REACTANCE IN OHMS | 880.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 145.00 NOMINAL |
| SHAFT DIAMETER | 0.1871 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5620 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, UNDERCUT SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 91.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 30.0 MILLIAMPERES NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| ZSO RESISTANCE IN OHMS | 160.00 NOMINAL |
| TERMINAL LOCATION | SIDE |
| TERMINAL TYPE AND QUANTITY | 12 WIRE LEAD |
| TRANSFORMATION RATIO | 0.980 ROTOR TO STATOR NOMINAL |
| UNDERCUT WIDTH | 0.0470 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |