| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| STATOR INPUT CURRENT RATING | 230.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| BODY STYLE | STANDARD ROUND D |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| BODY SIZE | 22 |
| ZRO RESISTANCE IN OHMS | 856.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 6770.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 1460.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 11050.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 648.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 697.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 325.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 248.00 NOMINAL |
| TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 2.600 INPUT TO OUTPUT NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 6.0 CENTIMETER-GRAMS NOMINAL |
| SHOULDER DIAMETER | 1.8800 INCHES NOMINAL |
| PILOT DIAMETER | 0.6000 INCHES NOMINAL |
| SECOND SHOULDER DIAMETER | 1.8850 INCHES NOMINAL |
| SECOND SHOULDER LENGTH | 0.1500 INCHES NOMINAL |
| OVERALL LENGTH | 3.8360 INCHES MAXIMUM |
| FLANGE DIAMETER | 2.1500 INCHES NOMINAL |
| FLANGE THICKNESS | 0.1500 INCHES NOMINAL |
| BODY DIAMETER | 1.8500 INCHES NOMINAL |
| PILOT LENGTH | 0.0430 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0700 INCHES NOMINAL |
| AFT OF FIRST FLANGE DIAMETER | 1.8900 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.1600 INCHES MAXIMUM |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHAFT DIAMETER | 0.2450 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.6760 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3860 INCHES NOMINAL SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.245 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, CORROSION RESISTING |