| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AFT OF SECOND FLANGE DIAMETER | 3.3740 INCHES MINIMUM AND 3.3750 INCHES MAXIMUM |
| BODY DIAMETER | 3.3850 INCHES MINIMUM AND 3.3900 INCHES MAXIMUM |
| BODY STYLE | STANDARD ROUND DOUBLE FLANGE A |
| BODY SIZE | 37 |
| DISTANCE BETWEEN FLANGES | 1.3120 INCHES NOMINAL |
| FLANGE DIAMETER | 3.6240 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.6550 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 5.9200 INCHES NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 35.00 OUTPUT |
| MAXIMUM TEMP RISE | 60.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 170.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 4.0300 INCHES MAXIMUM |
| PILOT DIAMETER | 1.6250 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 1.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.1600 INCHES NOMINAL |
| RECEIVER ERROR ANGULAR RANGE IN MINUTES | -36.0 TO 36.0 |
| ROTOR INPUT CURRENT RATING | 1.9 AMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 20.0 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SECOND SHOULDER DIAMETER | 3.3740 INCHES MINIMUM AND 3.3750 INCHES MAXIMUM |
| SECOND SHOULDER LENGTH | 0.3750 INCHES NOMINAL |
| SHAFT DIAMETER | 0.2403 INCHES MINIMUM AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.8900 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3870 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 3.3290 INCHES MINIMUM AND 3.3340 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/70 GOVERNMENT SPECIFICATION |
| SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| ZSS IMPEDANCE ANGLE IN DEG | 66.00 MINIMUM AND 70.00 MAXIMUM |
| ZSS IMPEDANCE MAGNITUDE IN OHMS | 3.00 MINIMUM AND 4.00 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TORQUE GRADIENT PER ANGULAR DEG | 0.900 INCH-OUNCES NOMINAL |
| TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |