| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 6.0 CENTIMETER-GRAMS NOMINAL |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 23 |
| FLANGE DIAMETER | 2.2500 INCHES NOMINAL |
| FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.2250 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 3.9320 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 40.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.1600 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6000 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 1.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.2000 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 408.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 96.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 80.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 750.00 NOMINAL |
| SHAFT DIAMETER | 0.2405 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.7320 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.185 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3860 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 1.9900 INCHES NOMINAL |
| SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| ZRO RESISTANCE IN OHMS | 212.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 262.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 20.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 1660.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 20.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 450.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 1.9995 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.2030 INCHES NOMINAL |