5905-00-101-2523 RESISTOR,FIXED,WIRE WOUND Index 5905-00-101-2525 RESISTOR,FIXED,WIRE WOUND

National Stock Number:
5990-00-101-2524

Federal Supply Class:
5990

National Item Identification Number:
001012524

Description:
SYNCHRO,CONTROL TRANSFORMER

Detail:
A SYNCHRO CONSISTING OF A STATOR AND ROTOR INDUCTIVELY COUPLED. THE ELECTRICAL OUTPUT OF THE ROTOR IS DEPENDENT UPON BOTH THE POSITION OF THE ROTOR AND THE ELECTRICAL INPUT TO THE STATOR FROM A TRANSMITTER SYNCHRO OR A DIFFERENTIAL SYNCHRO. DOES NOT INCLUDE VARIABLE RESISTORS, GONIOMETERS, OR VARIABLE TRANSFORMERS.


Manufacturer Information:
11-GLT-25RHX/B85299932MOOG INC.
11GLT25RHX/BB299932MOOG INC.
11GLT25RHXB85299971LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS
7537281P000199971LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS
7537281P199971LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS


Techincal Specification:
STATOR INPUT VOLTAGE RATING IN VOLTS11.8 NOMINAL
TERMINAL TYPE AND QUANTITY5 WIRE LEAD
BODY STYLESTANDARD ROUND C
FREQUENCY IN HERTZ400.0 NOMINAL
BODY SIZE11
ZRO IMPEDANCE MAGNITUDE IN OHMS3160.00 MINIMUM AND
3740.00 MAXIMUM
ZRO IMPEDANCE ANGLE IN DEG78.00 MINIMUM AND
84.00 MAXIMUM
ZSO IMPEDANCE MAGNITUDE IN OHMS594.00 MINIMUM AND
736.00 MAXIMUM
ZSO IMPEDANCE ANGLE IN DEG79.00 MINIMUM AND
85.00 MAXIMUM
ROTOR DC RESISTANCE IN OHMS415.00 NOMINAL
STATOR DC RESISTANCE IN OHMS64.00 NOMINAL
TRANSFORMATION RATIO1.560 ROTOR TO STATOR NOMINAL
PHASE SHIFT ANGLE IN DEG4.800 INPUT TO OUTPUT NOMINAL
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT25.00 OUTPUT
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT35.00
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES-5.5 TO 5.5
SHOULDER DIAMETER0.9995 INCHES MINIMUM AND
1.0000 INCHES MAXIMUM
PILOT DIAMETER0.6245 INCHES MINIMUM AND
0.6250 INCHES MAXIMUM
OVERALL LENGTH2.1660 INCHES MINIMUM AND
2.1860 INCHES MAXIMUM
FLANGE DIAMETER1.0570 INCHES MINIMUM AND
1.0650 INCHES MAXIMUM
FLANGE THICKNESS0.0900 INCHES MINIMUM AND
0.0960 INCHES MAXIMUM
UNDERCUT DIAMETER0.9700 INCHES MINIMUM AND
0.9800 INCHES MAXIMUM
UNDERCUT WIDTH0.0620 INCHES NOMINAL
PILOT LENGTH0.0590 INCHES MINIMUM AND
0.0650 INCHES MAXIMUM
SHOULDER LENGTH0.0590 INCHES MINIMUM AND
0.0650 INCHES MAXIMUM
MOUNTING SURFACE TO TERMINAL END DISTANCE1.6910 INCHES MAXIMUM
SHAFT TYPEROUND, SLOTTED SINGLE SHAFT
SHAFT DIAMETER0.1870 INCHES MINIMUM AND
0.1873 INCHES MAXIMUM SINGLE SHAFT
SHAFT LENGTH0.5340 INCHES MINIMUM AND
0.5600 INCHES MAXIMUM SINGLE SHAFT
SHAFT SLOT DEPTH0.0260 INCHES MINIMUM AND
0.0360 INCHES MAXIMUM SINGLE SHAFT
SHAFT SLOT WIDTH0.0260 INCHES MINIMUM AND
0.0360 INCHES MAXIMUM SINGLE SHAFT
TERMINAL LOCATIONSIDE
BODY MATERIALSTEEL, STAINLESS
FRAGILITY FACTORMODERATELY RUGGED


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us