| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 9 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 3.8430 INCHES MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.3230 INCHES MAXIMUM |
| PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 9.500 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0570 INCHES MINIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 150.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 15.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 26.20 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 24.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 170.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 930.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.1246 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM FRONT SHAFT |
| SHAFT LENGTH | 0.4230 INCHES MINIMUM AND 0.4530 INCHES MAXIMUM FRONT SHAFT |
| SHAFT TYPE | ROUND, UNDERCUT FRONT SHAFT |
| STATOR DC RESISTANCE IN OHMS | 7.50 NOMINAL |
| ZRO RESISTANCE IN OHMS | 32.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 55.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 7.30 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SOLDER STUD |
| UNDERCUT DIAMETER | 0.7900 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |