| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6.00 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.00 CENTIMETER-GRAMS MAXIMUM |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.7500 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.4190 INCHES NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 7340.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 20.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 1150.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 17.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 320.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SHAFT DIAMETER | 0.0840 INCHES NOMINAL SINGLE SHAFT |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT HOLE DIAMETER | 0.0600 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPER ANGLE IN DEG | 3.0 SINGLE SHAFT |
| SHAFT TAPER LENGTH | 0.1940 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPERED END MINOR DIAMETER | 0.0775 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 26.00 NOMINAL |
| SPECIAL FEATURES | SHAFT INTERNALLY THREADED 0-80 UNF 2B |
| ZRO RESISTANCE IN OHMS | 1520.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 26.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| UNDERCUT DIAMETER | 0.6910 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |